Summary

  • FICIX publishes a 2026 price list scoped to "all FICIX sites" with port fees from 250 € to 800 € a month and one 100 € monthly service fee for all customers — and no statement of whether that fee is charged once per customer or once per site.
  • Its own technology page says interconnection runs on five switches in three IXPs that "are not interconnected together", recommends connecting to more than one point for reliability, and prices no second-site port anywhere in the list.

Five switches, one price list, three fabrics

The FICIX price list is short enough to read in a minute and exact enough to bill from. A 10G port costs 250 € a month. A 100G port on the default LR1 optics costs 300 €, the same port with optional optics 350 €. A 400G port costs 800 €. An extra 10G or 100G-LR1 port on the same switch costs 80 €. A virtual port, for customers connecting through a FICIX Partner, costs 20 €. Above all of it sits one line: "Service fee (for all customers) 100 €/month". The list opens with its scope and its date — "Valid from 1.1.2026 for all FICIX sites", "Prices VAT 0%" — and closes with an optical-panel row for FICIX-1 and FICIX-2 only. All of that is printed on the association's pricing page, which the service agreement itself points to as the record of current prices.

Now read the technical page beside it. "Interconnection is implemented with five switches in three IXPs," the technology page says: four switches in the Helsinki region, one at Otaniemi in Espoo under FICIX1 with an extension site at Telia Helsinki Data Center in Pitäjänmäki, one at Digita in Pasila under FICIX2 with an extension site at Equinix HE7, and the third IXP "located at the city of Oulu (FICIX3)". The about page says the same thing in one blunt sentence: "FICIX operates at three different IXPs which are not interconnected together."

That sentence is the whole architecture in six words. Three fabrics, five sites, no joining span between them. Its front page describes the association as "the Finnish Communication and Internet Exchange association and the largest IXP in Finland", operating since 1993 and counting 67 customers, and lists the same site grouping.

The recommendation the price list does not price

The technology page then gives its customers advice that no line on the price list answers: "It is highly recommended that customers connect to more than one interconnection point for reliability reasons."

Take that seriously and the bill changes shape. The 80 € rate is scoped in its own wording to an additional port "on the same switch". Two 100G-LR1 ports on one switch are printed as 380 € and four as 540 €, and both totals close against the 80 € row: 300 + 80 = 380, and 300 + 3 × 80 = 540. The ladder is internally consistent — for extra ports in one place, on one fabric, behind one switch.

Nothing in the document read prices a second port at a different FICIX site. A customer who follows the recommendation and takes presence at FICIX1 and FICIX2 is buying two ports at two connection points, and the published list gives no rate for the second one beyond the ordinary port fee. Whether that is 80 € or 300 € or 800 € depends on the port, and the discount for company does not travel.

One more row refuses to generalise. The optical panel at the splice cabinet is priced at 800 € to install and 20 € a month, and the row is labelled "(FICIX-1/FICIX-2)". FICIX3 is not in it, in a list introduced as valid for all FICIX sites. That is not a statement that Oulu has no splice cabinet or cannot take a panel. It is narrower and worth stating plainly: the 2026 list does not price one there.

The fee with no unit

Here is where the arithmetic stops closing.

The service fee is printed once, described as being for all customers, and it never says what it attaches to. Per customer? Per port-bearing site? Per fabric? Three readings, one printed number, no sentence choosing between them. On a list that names a 20 € partner port and an 80 € spare port to the euro, that is the one figure left open.

Take the single-customer reading and the sums are clean: a lone 10G port costs 250 + 100 = 350 € a month, and a lone 400G port costs 800 + 100 = 900 €. Take the per-site reading and a member present on two fabrics pays the fee twice, every total above rises by 100 €, and the cost of the resilience the operator recommends doubles in that one line while the port prices stay put.

The two readings are mine, not FICIX's. The published document does not choose, and I will not choose for it. What the document does establish is that the single number a customer most needs in order to buy redundancy is the one number whose denominator the list leaves off.

Who sets the number

The service agreement, version 2022-v1, explains where the prices come from and how they arrive. Pricing is set annually by the annual general meeting on a budget the board prepares, and documented on the pricing page — so the website is not a marketing summary but the only published record of a decision taken by the membership. Services are invoiced as monthly fees, with a three-month invoicing period and a 30-day payment term, in euros. Only written orders bind.

Appendix A of the same document lists five connection points with postal addresses: FICIX1 at Innopoli 1, Tekniikantie 12, 02150 Espoo; FICIX1-HDC at Telia Helsinki Datacenter, Valimotie 5, 00380 Helsinki; FICIX2 at Digita's broadcast centre, Uutiskatu 5/Radiokatu 5, 00240 Helsinki; FICIX2-HE7 at Equinix HE7, Sinimäentie 8, 02630 Espoo; FICIX3 at DNA Oyj, Torikatu 16, 90100 Oulu. The order form names the same five again, one line each: "Initial service subscription is for _________ peering port at FICIX1", and so on through FICIX3. A port is bought at a place.

The agreement is organised that way even where the price list is organised by speed.

The same document sets the terms the price list cannot. Services are provided "on ‘as-is’ basis". "Member is responsible for all connections and transmission to FICIX services." Against hardware failure FICIX states "full coverage against hardware failures with 4 hour response time and 24/7/365 monitoring" — a response time, not an uptime figure, and not a promise about a member's peering. Liability is limited to one month's invoicing value of the service in question.

Two doors, thirteen conditions, no fees

Membership is not the only way in. The membership page admits "any legally competent society or foundation that approves of the purpose of the association" and states that individuals are not accepted as members; the customers page opens with "Your organisation is welcomed to become a FICIX customer" and refuses individuals on the same terms. In both routes the board grants or denies the application.

Both pages carry thirteen numbered conditions and they are operational, not commercial: practise internetworking at the exchange point, agree traffic exchange bilaterally, never use the point as a default route or for transit, belong to a regional internet register, hold an AS number active in the common routing table, publish contact details, accept email as the channel, and transmit and receive "at your own risk". Not one of the thirteen is a fee, a volume commitment or a service level. The price list does the commercial work alone.

One gap deserves its own sentence. The membership documents page instructs applicants to "Read the rules of FICIX association carefully (Fin) (Eng)" and states that the demands for membership are non-negotiable, but the rules document itself was not obtained in this reading. Nothing here quotes it, and nothing here characterises it.

The same site, two postcodes

Equinix HE7 carries two descriptions from one publisher. The website groups it with Digita Pasila under FICIX2: "FICIX2 at Digita Helsinki Pasila and Equinix HE7". Appendix A gives the same connection point an Espoo postcode: "FICIX2-HE7 / Equinix HE7 – Helsinki, Sinimäki / Sinimäentie 8 / 02630 Espoo, Finland".

I print both and adopt neither. A postal code is not a fabric, and this one does not change what a port costs. It matters because the site list is what a customer plans against: the same building is filed under the Helsinki exchange on one page and given an Espoo address in the contract, and a reader trying to work out which fabric a cross-connect joins has to hold two printings in mind.

What the documents settle

Four things are nailed down. The port ladder is exact, dated and scoped to all sites. The three IXPs are separate by the operator's own description. Entry runs through two doors with the same thirteen operating conditions. The price is decided annually by the annual general meeting.

Four things are not. The unit of the 100 € service fee is unstated. A port on a second fabric has no published rate beyond the ordinary port fee. The optical panel is priced at two of three exchanges. And no document read says what happens to a member's peering when one site or one fabric goes out — the only published advice is the recommendation to buy a second point.

Evidence and its limits

  1. Every quotation and figure here comes from seven FICIX documents read on 20 November 2026 between 12:13Z and 12:15Z: the front page, About us, Technology, the pricing page, the 2022-v1 service agreement, the membership page and the customers page.
  2. None of those pages carries a publication date. The price list states only that it is valid from 1 January 2026, and prints no end date.
  3. All amounts are as printed at VAT 0 per cent. Nothing is converted, no tax is added, and no figure is restated in another currency.
  4. The price list is introduced as valid for all FICIX sites and never says whether the 100 € service fee is charged per customer, per port-bearing site or per fabric. That unit is absent from the document read and is not inferred here.
  5. The 80 € rate is scoped to an additional port on the same switch. No document read prices a second port at a different FICIX site at that rate, so the cost of a second fabric is simply not published.
  6. The optical-panel row names FICIX-1 and FICIX-2 only. Nothing read says FICIX3 has no splice cabinet, that a panel cannot be installed there, or what it would cost.
  7. "Not interconnected together" is FICIX's own description of its three IXPs. No document read states the connectivity outcome for a member when one site or one fabric fails.
  8. The agreement was retrieved through a search adapter and may be truncated. The absence of a failover clause in the extract is not evidence that the full PDF has none, and the article does not claim that it does.
  9. The four-hour hardware-failure response and the 24/7/365 monitoring sentence are quoted as printed. No document read defines what counts as a hardware failure, what the response consists of, or whether a response restores peering.
  10. The one-month liability limit is taken from the retrieval summary of the agreement, not from a quoted sentence, and is labelled as such.
  11. The association rules document was not obtained. Admission is described from the two published condition lists and the agreement, and the gap is recorded rather than filled.
  12. No BGP session, looking glass, traffic statistic, latency measurement or site visit was performed. Every speed figure here is a product description, not a measurement.

The bill a Finnish network can compute today is exact for one fabric and approximate for two. The exchange that recommends buying the second one has published everything about the first.